Monday, December 6, 2010

ADS, France PET Blowing Machine

Model: G 64C07 HPE
- No. of hours: 10,000 hrs.
- Max no of cavity: 4 Nos.
- Capacity: 4500 to 5000 bottles per hour
- The equipment is in very good condition

Equipped with:
1) Water Chiller

- Make: MTA/SRC, Italy
- Model: TAE 051

2) Air Compressor
- Make: Atliers
- Model: C24A

3) Cooling Tower
- Make: Baltimore Air-cool Halia Srl
- Model: VX19-3

4) Air Dryer
- Make: Hankinson
- Model: HPET1.

For more details on ADS, France PET Blowing Machine click here

32 to 48 Cavity PET Preform Injection Moulder

We are looking for 32 to 48 cavity injection moulding machine to manufacture 19.5 gram PET Preform.

For more details on 32 to 48 Cavity PET Preform Injection Moulder click here

Wednesday, November 10, 2010

Complete PET Filling Line for Carbonated Beverages

- Parmatec Acqua Mix Carbonator
- Capacity 29000 LT/H
- Format 0.5, 1 L, 1.5 L, 2 L
- Corema PCE/AP 45ECS Chiller
- Equipment condition excellent
- Ghiardi Paolo CIP 1000TS
- Capacity 24000 LT/HH
- Atlas Copco Crepelle 24 Compressor
- Logics controls control level Cork CP10X
- P.

For more details on Complete PET Filling Line for Carbonated Beverages click here

Sidel Complete PET Bottling Line

A complete Bottling line for Still and Carbonated Beverages
Its consisting of:
Sidel SB06 Series 2 Bottle Blow Moulding machine (max. 8,400 bph)
- Masselli Misure UR-22 Digital Brix Refractometer ((Year 1998)
- Sacmi Opra 200 Reel Feed Labeller (18,000 bph - Year 2005)
- Sacmi Kmix 200003XVB Dristal Mix (20,000 L/hr - Year 2004)
- Dosier-und Mischtechnik Burdomat Velcorin 11K
- Oxe Quasar Hot Melt 720F 12S1EI Labeler (max.

For more details on Sidel Complete PET Bottling Line click here

Tuesday, November 2, 2010

KHS Aseptic Filling Line

- The line was manufactured in 2006
- It can fill still and carbonated drinks
- The filling process can be sold separately for 1,800,000 Euro
- The complete line can be seen in production and is fo

For more details on KHS Aseptic Filling Line click here

Tuesday, October 19, 2010

Complete PET Bottle Moulding and Labelling Line

- SIDEL, SBO 6/6, 6 CAVITY REHEAT STRETCH BLOW MOULDING MACHINE, 6 ZONE OVENS, HOPPER/ELEVATOR, SIDEL UNSCRAMBLER, 1993

- SIDEL, SBO 6/6, 6 CAVITY REHEAT STRETCH BLOW MOULDING MACHINE, 6 ZONE OVENSS, CONTROL PANEL, GAYLORD DUMPER, SIDEL HOPPER/ELEVATOR, SIDEL UNSCRAMBLER

- SIDEL, SBO 10/14, 10 CAVITIES, REHEAT STRETCH BLOW MOULDING MACHINE, 14 ZONE OVENS, CONTROL PANEL, SIDEL HOPPER/ELEVATOR, SIDEL UNSCRAMBLER, GUPM MOULD HOLDERS AND A VISION SYSTEM, 1993

- SIDEL, SBO 24/24, 24 CAVITIES, REHEAT STRETCH BLOW MOULDING MACHINE, 24 ZONE OVENS, CONTROL PANEL, GAYLORD DUMPER, SIDEL HOPPER/ELEVATOR, PREFORM CONVEYOR, SIDEL UNSCRAMBLER

MOLDS:
- SET OF 16 OZ STOCK BEER & 16, 24, 38, 48 OZ EDIBLE OIL (FOR SIDEL SBO 6)

- GUPM SHELL HOLDERS (FOR SIDEL SB0 24/24)

PELLETIZERS:
- OMS PELLETIZING SYSTEM COMPRISED OF BEIHLE SYSTEMS CONVEYOR BOTTLE TRANSFER ONTO A 4-1/2 PLASTIC TABLE TOP CONVEYOR, SIFCO BOTTLE TRANSFER FROM BEIHLE SYSTEMS CONVEYOR ONTO 7.

For more details on Complete PET Bottle Moulding and Labelling Line click here

Monday, June 14, 2010

Husky PET Preform Injection Moulder

Model: XL300 P120/E100 (Reconditioned)
a) Clamping unit:
- Clamp force: 300 MT
- Distance between tie bars (H x V): 720 x 720 mm
- Clamp stroke (Max.): 650 mm
- Mould shut height: 250 to 750 mm

- Daylight (Max.

For more details on Husky PET Preform Injection Moulder click here

PET Preform Moulds and Equipment

We are looking for PET preform equipment with the "right" preform moulds - mostly PCO28-1810, but increasingly light neck finishes for still water (such as Hexalite 26 or Corvaglia-types for still watter).

For more details on PET Preform Moulds and Equipment click here

Husky PET Preform Injection Moulder

We are looking for Husky PET preform injection moulding machine with atleast one of the following molds:
- 48 cavity
- 21.5 to 22 gm
- Neck size: 28 mm Alaska
or
- 48 cavity
- 26 gm,
- Neck

For more details on Husky PET Preform Injection Moulder click here

Wednesday, May 26, 2010

Husky PET Preform Injection Moulding System

Model: LX 300 PET 300 Ton
- P100/120 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- PET preform mould
- Dryer system


For more details on Husky PET Preform Injection Moulding System click here

Husky PET Preform Injection Moulding Systems

Model: GL 300 PET
- Year: 1995 to 1998
- P100/120 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- Dryer system
- Preform moulds that are available arre 48-cavity Husky 23.

For more details on Husky PET Preform Injection Moulding Systems click here

Thursday, March 11, 2010

Husky PET Preform System

Model: GL 300 PET P100/120 E100
- Cavities: 48
- Clamp force: 300 ton
- Clamp stroke (Inj. mould): 700 mm
- Distance between tie bars: 720 x 720 mm
- Platen size: 1036 x 1036 mm
- Mould shhut height: 450/900 mm
- Max.

For more details on Husky PET Preform System click here

Netstal PET Preform System

Model: HP 3500/3550 R
- Cavities: 48
- Clamp force: 350 ton
- Clamp stroke (Inj. mould): 625 mm
- Max. daylight: 680 mm
- Ejector stroke: 180 mm
- Plasticizing capacity: 145 gm
- Screw d

For more details on Netstal PET Preform System click here

Netstal PET Preform Machine

Model: PET 6000-6600 R (96 Cavity)

Technical specifications:
- Cavities: 144
- Clamp force: 600 ton
- Plasticizing capacity: 1,480,000 gm
- Screw speed: 95 RPM
- Injection capacity: 6,0000 cm3/shot
- Shot weight: 6,446 gm
- Injection pressure: 1,100 bar
- Injection stroke (max): 320 mm

Electrical specifications:
- Voltage/Frequency/Phase: 400/60/3 V/Hz/Ph

Additional information:
- Installed power: 579 KW
- Average power consumption: 330 KW
- Screw diameter: 2 x 110 mm
- Throughput: 2 x 145 g/sec.

For more details on Netstal PET Preform Machine click here

Friday, February 19, 2010

PET Preform Neck Crystallizer

We are looking for a PET preform neck crystallizer mainly for 28 diameter necks which are used for blowing bottles to pack fruit drinks like Minute Maid of Coca Cola or Slice of Pepsi etc.

This crrystallizer should be of M/s.

For more details on PET Preform Neck Crystallizer click here

Husky PET Preform Injection Moulding Machine

Model # INQ 400PET
- P120-130 E140 extruder
- 120 mm extruder
- 140 mm shooting pot
- PET preform mould
- Dryer system
- Air dehumidifier
- Equipment has been very well maintained


For more details on Husky PET Preform Injection Moulding Machine click here

Husky PET Preform Injection Moulding Machine

Model # GL 600 PET
- P100/120 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- PET preform mould
- Dryer system
- Air dehumidifier
- Equipment has be

For more details on Husky PET Preform Injection Moulding Machine click here

Husky PET Preform Injection Moulding Machine

Model # GL 300 PET Co-Ex
- Kortex co-ex package
- P100/110 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- PET preform mould
- Dryer system
- Air de

For more details on Husky PET Preform Injection Moulding Machine click here

Husky PET Preform Injection Moulding Machine

Model # GL 300 PET
- P100/120 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- PET preform mould
- Dryer system
- Air dehumidifier
- Equipment has be

For more details on Husky PET Preform Injection Moulding Machine click here

Husky PET Preform Injection Moulding Systems

Model # GL 300 PET
- P100/120 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- PET preform mould
- Dryer system
- Air dehumidifier
- Equipment has be

For more details on Husky PET Preform Injection Moulding Systems click here

Husky PET Preform Injection Moulding Machines

Model # GL 300 PET
- P100/120 E100 extruder
- 100 mm extruder
- 120 mm shooting pot
- Husky with (3) stage robot system
- PET preform mould
- Dryer system
- Air dehumidifier
- Chiller
- Equip

For more details on Husky PET Preform Injection Moulding Machines click here

Netstal 350 Ton PET Preform Injection Moulding Mac

Model: 3500/3550-R
- Clamp mechanism: Toggle
- Screw diameter / L:D ratio: 110 mm / 23:1
- Shooting pot diameter: 110 mm
- Injection capacity: 3040 cubic cm
- Injection pressure: 1167 bar
- Hydr

For more details on Netstal 350 Ton PET Preform Injection Moulding Mac click here

Netstal 600 Ton PET Preform Injection Moulding Mac

Model: PET 6000/6600-R
- Screw diameter / L:D ratio: 110 mm / 23:1
- Shooting pot diameter: 150 mm
- Injection capacity: 6000 cubic cm
- Injection pressure: 1100 bar
- Hydraulic pump motor: 192 K

For more details on Netstal 600 Ton PET Preform Injection Moulding Mac click here

Netstal 600 Ton PET Preform Injection Moulding Mac

Model PET 6000/6600-R
- Clamp mechanism: Toggle
- Screw diameter / L:D ratio: 110 mm / 23:1
- Shooting pot diameter: 150 mm
- Injection capacity: 6000 cubic cm
- Injection pressure: 1100 bar
- H

For more details on Netstal 600 Ton PET Preform Injection Moulding Mac click here

Wednesday, January 6, 2010

Husky and Netstal PET Preform Machines

1) Make: Husky
- Model: XL300 PET
- Year: 1991
- Moulds: Husky 32/48 cavities
- Equipped with secador and dehumidifier

2) Make: Husky
- Model: LX 300PET P100/120 E100
- Year: 1995
- Moulds:

For more details on Husky and Netstal PET Preform Machines click here

PET Preform Injection Moulding Machines

We need used Husky make or Krauss Maffei make PET preform injection moulding machines
- The machine should be of shot weight of 1.2 to 1.5 kg.
- Machine will be used to run a 4 cavity mold - Prefor

For more details on PET Preform Injection Moulding Machines click here

PET Preform Machine

We are looking for PET preform machine Our preform size is as follows:
- Neck size: 60 mm
- Length: 230 mm
- Preform weight: 250 grams

We prefer good brands like Husky
Machine should be capable

For more details on PET Preform Machine click here